R1200C 2-Piece Fairing

Eliminate wind noise, turbulence, back-pressure and buffeting

AeroFlow 2-Piece Fairing Design consists of an Upper Windscreen available in 3 heights, Lower Body section that wraps behind the turn signals and our custom mounting brackets.

Custom Mounting Brackets
Handle Bar Mounted brackets will fit the BMW High Bars only and bars must be at a 45-degree angle.

Lower Body Portion
Directs air down, out and away from the rider. The Fairing Body delivers lower torso protection and expands the envelope of protection. Lower body portion fits behind turn signals and angles down and back. The widest point measures 23 1/2″ and is even with where the Upper windscreen and Lower Body connect.

Upper Windscreen Portion
The Upper Windscreen portion allows airflow to the backside of the windscreen. This airflow combines with the air traveling on the front of the screen at the “flare” pushing the air up and over your helmet.  The flare or lip lifts the air 4″ to 6″ higher than a conventionally contoured screen, increasing laminar airflow and reducing turbulence.  Available in 3 heights: Standard, Medium, Tall.

Heights measured vertically from the center of the gas tank
Standard:17 1/2″ Medium:19″ Tall:20 7/8″

Height Recommendations
Standard: Up to 5’7″ Medium: Up to 6’1″ Tall: Over 6’1″
The best way to determine the correct height, is to measure the heights available and go with the tallest one you can easily/comfortably see over.

Please note: The R1200C Fairing is a discontinued product.  Once we sell out of brackets and plastic, we will not be producing anymore.  All sales are final.  No exchanges or returns.