AeroFlow, Corp.
.
HOME
AeroFlow, Corp.

R1200C 2-Piece Fairing

 

 

2 Piece Fairing Design:
Upper Windscreen available in 3 heights, Lower Body available in Clear and all mounting brackets/hardware.  Handle Bar Mounted brackets will fit the BMW High Bars only and bars must be at a 45 degree angle.  Please note: The R1200C Fairing is a discontinued product.  Once we sell out of brackets and plastic, we will not be producing anymore.  All sales are final.  No exchanges or returns.

 

2-Piece Fairing Upper Windscreen Portion:
The Upper Windscreen portion allows airflow to the backside of the windscreen. This airflow combines with the air traveling on the front of the screen at the "flare" pushing the air up and over your helmet.  The flare or lip lifts the air 4" to 6" higher than a conventionally contoured screen, increasing laminar airflow and reducing turbulence.  Available in 3 heights: Standard, Medium, Tall.


Heights measured vertically from the center of the gas tank
Standard:17 1/2" Medium:19" Tall:20 7/8"

 

Height Recommendations

Standard: Up to 5'7" Medium: Up to 6'1" Tall: Over 6'1"
The best way to determine the correct height, is to measure the heights available and go with the tallest one you can easily/comfortably see over.

 

2-Piece Fairing Body Portion:
Directs air down, out and away from the rider. The Fairing Body delivers lower torso protection and expands the envelope of protection. 

Lower body portion fits behind turn signals and angles down and back.
Width is 23 1/2" where windscreen and lower body portion connect.

Available in Clear only.

 

Customer Testimonials:

Just a short note to thank you for the quick delivery of a quality product. I received the Aeroflow windshield for my BMW R1200C yesterday and installed it last night. The installation instructions were clear and it is a perfect fit. A quick ride down the freeway confirmed what everyone told me about your products...it works! Thanks again for your assistance and quality assurance.
Roger D. Dempsey
[More Testimonials]

 

R1200C Half Fairing: Handle Bar Mounted brackets will fit the BMW High Bars only and bars must be at a 45 degree angle. 

Please note: The R1200C Fairing is a discontinued product.  Once we sell out of brackets and plastic, we will not be producing anymore.  All sales are final.  No exchanges or returns.