I would highly recommend the Aeroflow Hybrid screen. If you've been having trouble finding the balance of good protection, whilst being able to see over the screen, especially around my height, check this out! (More)
The GT/L Hybrid AeroScreen combines the most effective components of the GT AeroScreen and the GTL AeroScreen to provide maximum
coverage and protection. We've taken the GTL AeroScreen perimeter shape & width and combined it with the GT AeroScreens sleek
curves and flared top.
Slightly shorter in length than our GT screens, the GT/L allows shorter drivers to see over when full down yet provide over-helmet airflow when raised an inch to relieve low pressure.
Use the above measurements to determine where the top edge of the Hybrid screen will be relative to your line of
sight. Measurements should be taken with the bike off the centerstand, on a level surface.
Start with the screen in the full-down position. Raise your stock screen 1" to 1 1/2". Measure the heights vertically from the top, center of the stock screen.
You'll want to pick the screen that is level with your upper lip / tip of your nose. The taller the screen is, the less you have to raise it to get the air up and over your helmet. The higher you lift the screen, the bigger the gap gets between the bottom edges of the screen and the dash. The bigger that opening gets, the more air sweeps around the sides and hits your torso, arms, shoulders, etc. A taller screen at a lower height will work better than a shorter screen raised higher.
Standard Height for drivers with custom, low seats.
Medium Height for drivers up to 5'10".
Tall Height for drivers 5'10" to 6'3".
Extra Tall Height for 6'4"