AeroFlow, Corp.

AeroFlow, Corp. is open. COVID-19 Update
.
HOME

K1300GT '09-'13 & K1200GT '06-'12 AeroScreen

The AeroFlow Solution
The AeroScreen is taller, closer to the driver, and wider than the stock screen.

Designed to allow the driver to see over the screen while providing optimum protection for both driver and passenger.  2 Heights available to suit all drivers.  Available in Clear only.

 


AeroScreen Design

The AeroScreen has several notable features incorporated into the design that contribute to its performance.  Flares at the top and sides expand the envelope of protection for solo or 2-up riding. Our goal is to provide you a screen that eliminates turbulence, buffeting and back-pressure.  AeroScreens provide smooth over the helmet airflow at a much lower setting than either of the BMW screens.  Providing better protection while looking over the screen.

 

2 Heights available to suit all drivers


AeroFlow Standard AeroScreen:

Dimension A: 18 3/4".  1 3/4" taller than BMW short screen, 1/4" taller than BMW Tall screen.

Dimension B: 17 5/8"

 

AeroFlow Tall AeroScreen:

Dimension A: 20 5/8".  3 5/8" taller than BMW short screen, 2 1/2" taller than BMW Tall screen.

Dimension B: 18 1/8"


Height Recommendations:
Optimum airflow occurs when AeroScreen is lifted 1" to 1 1/2" from full down position.  The best way to determine the correct height, is to measure the heights available and go with the tallest one you can easily/comfortably see over.

Standard height for drivers to 5'10".
Tall height for drivers up to 6'6".

 

Includes Smoke "Laminar Flow Plate"
The Laminar Flow Plate replaces the stock BMW deflector at the top of the dash & is a key ingredient to making the screen work.  Once the AeroScreen is lifted approximately 1", air flows under the AeroScreen and up the dash.  The Laminar Flow Plate controls this airflow and attaches it to the backside of the AeroScreen.  The airflow then follows the AeroScreens contours to the top of the AeroScreen where it merges with the airflow from the front.  This combined airflow smoothes out the air leaving the top of the screen, which, in turn, is pushed up and over the driver and passenger.

 

Customer Testimonials:
Just to let you know that I have now had my aeroflow screen fitted to my new K1300GT as a dealer swap for the defunct BMW screen. The screen and gards were supplied by your French agents without any difficulty last year.  I cannot imagine life without the screen and aerogards. I am an all weather all year biker and it simply transforms the comfort and wind control. I remain warm and even dry - the rain simply does not get to me. My son, a regular back seat rider, also noticed the lessening of wind on his legs. It cruises happily at 90mph+ and makes for easy 250 mile sections without a break - not many bikes can do that a leave the rider feeling human. I would not be without it, and thank you. It was well worth the wait.
Chas Lister
[More Testimonials]

K1300GT & K1200GT ('06-on) AeroScreen:
  

 

 

AeroFlow K1300GT ('09-'13) & K1200GT ('06-'12) AeroGards

We created AeroGards to block the air that sweeps around the sides of the fairing.  AeroGards improve the envelope of protection, increasing the comfort and protection for both driver and passenger.  AeroGards also provide more hand, arm and shoulder protection, great rain coverage & reduce wind fatigue.

2-piece design allows you to remove the Rear-Half AeroGard for more airflow to the body.  Store easily in saddle-bags. 

Available in Smoke only.


K1300GT & K1200GT ('06-on) AeroGards:
 

 

 

HeadLight Cover

 

Protect your expensive headlight assembly with an AeroFlow HeadLight Cover (HLC).  Molded to fit the contours of your headlight and manufactured with the same high quality plastic used in our windscreens, the clear HLC virtually disappears when mounted.  HLC's attach with Dual-Lok to provide a cushion for impact and a strong secure hold.  Don't get left in the dark - get your HLC today!

K1300GT '09-'13 & K1200GT '06-'12 HeadLight Cover: